Eductors & Syphons

Water Jet Eductor

Principle of Operation

Fig. 264, Fig. 266 and Fig. 265 Water Jet Eductors are designed for liquid pumping and mixing operations and for the handling of some solids. In operation, pressure liquid enters the eductor through the pressure nozzle and produces a high-velocity jet. This jet action creates a vacuum in the line which causes the suction liquid to flow up into the body of the eductor where it is entrained by the pressure liquid. Both liquids are thoroughly mixed in the throat of the eductor and are discharged against back pressure. The streamlined body permits the pressure liquid to move straight through the eductor and reduces the possibility of solids in the suction material from collecting and clogging. 

Fig. 2645 Automatic Water Jet Eductors are used to pump out sumps (pits, tanks, etc.) where liquid accumulates slowly but must be evacuated when it reaches a predetermined level. Operation of the Fig. 2645 Automatic Water Jet Eductor requires no electrical connections or external power other than motive fluid.

Water Jet Ejector(s)4-inch Fig. 266 Cast Iron Water Jet Eductor Cast iron body and tail, bronze nozzle and throat. Motive Inlet: 2-1/2”, 150# flange. Suction and Discharge Connections: 4", 150# flanges. Unit will use 162 gpm of 85 psig water to handle 340 ft3/hr of solids at a discharge pressure of 5 psig, and 270 ft3/hr of solids at a discharge pressure of 10 psig. Figure 264 Water Jet Eductor diagram with internal NPT connections and removable nozzle Figure 266 Water Jet Eductor internals depicting suction, pressure, and discharge connections


Fig. 264, Fig. 266 and Fig. 265 Water Jet Eductors have a low initial cost, are self-priming, have no moving parts, are easy to install, require little or no maintenance, and pump as well as mix liquids.

The Fig. 2645 Automatic Water Jet Eductor is self-operated and requires no electrical connections. The snap-action valve and ball float are the only moving parts. Special Automatic Eductors can be made from any other jet eductors.


For more detailed information about Water Jet Eductors, Bulletin 2M & Bulletin 2M Supp. Literature.

To submit a Request for Quote (RFQ) for Water Jet Eductors, Adobe PDF or submit an online interactive RFQ Form for Eductor / Syphon.

Schutte & Koerting, 2510 Metropolitan Dr., Trevose, PA 19053, USA
Tel: (215) 639-0900 Fax: (215) 639-1597 Email: